SYNSCAN SERIAL COMMUNICATION PROTOCOL V3.3 (NEW)
This document describes the serial commands of Sky-Watcher® SynScan™ hand control. This information applies to the SynScan™ V3, SynScan™ V4 series GOTO mounts.
Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port on the base of the hand control.
This communication protocol applies to SynScan hand control with SynScan™ V3 firmware version 3.38 or SynScan™ V4 firmware version 4.38.06 or later.
Size: 21504000 | 02-05-2016 | SynScan PC Command Set